
Dry Pipe Sprinkler System Alarm Valve With Accelerator
SANJING FIRE dry pipe sprinkler system alarm valve with accelerator is a type of valve that is used in dry pipe sprinkler systems to help improve the system's response time in the event of a fire.
SANJING FIRE dry pipe sprinkler system alarm valve with accelerator is a type of valve that is used in dry pipe sprinkler systems to help improve the system's response time in the event of a fire. It works by reducing the time it takes for the valve to open and release water from the sprinkler system.
In a standard dry pipe sprinkler system, there can be a delay of several seconds between the time a fire is detected and the time water is released from the system. This delay is due to the time it takes for the compressed air to be released from the pipes and the valve to open, allowing water to flow through the sprinkler heads.
A dry pipe sprinkler system alarm valve with accelerator can help reduce this delay by using an accelerator mechanism to help open the valve more quickly. The accelerator typically consists of a small chamber or piston that is filled with water or another fluid. When the valve is triggered, the pressure from the compressed air pushes against the accelerator mechanism, which in turn helps to open the valve more quickly.
The use of an accelerator in a dry pipe sprinkler system can help improve the system's response time, which can help minimize damage and potentially save lives in the event of a fire. However, it is important to note that these systems may require additional maintenance and testing to ensure they are functioning properly.
Parameter
1) Size: DN50 / DN65 / DN80 / DN100 / DN125 / DN150 / DN200 / DN250
2) Flange holes match to: PN16 / BS4504 / EN1092 / DIN2502 / ANSI150lb
3) Rated working pressure: 1.6MPa / 16bar / 235psi
4) Material: ductile cast iron body, rubber seal, galvanized accessory pipe, brass accessory valves
5) With all fittings include water motor bell, pressure switch, pressure gauge, solenoid valve etc.
|
Size |
DN80 |
DN100 |
DN125 |
DN150 |
DN200 |
DN250 |
|
Starting Time (s) |
≤15 |
≤60 |
||||
|
Friction Resistance |
≤0.07 |
|||||
|
Height of Alarm Valve (mm) |
330 |
350 |
430 |
500 |
||
|
Outside Diameter of Flange (mm) |
200 |
220 |
250 |
285 |
340 |
405 |
|
Diameter Between Flange Screw Hole (mm) |
160 |
180 |
210 |
240 |
295 |
355 |
|
Diameter of Flange Holes (mm) |
8 |
12 |
||||
|
Quantity of Screw Hole |
18 |
22 |
26 |
|||

Q&A
Q: Can you provide the FBA shipping service?
A: Yes, we have the good experience in providing the professional FBA service.
Q: What’s your tem of the delivery?
A: Our ordinary delivery term is FOB Xiamen. We also accept EXW, CFR, CIF, DDP, DDU etc. We’ll offer you the shipping charges and you can choose the one which is the most convenient and effective for you.
Q: Which shipping way can you provide?
A: We can provide shipping by sea, by air and by express.
Etichetta sexy: dry pipe sprinkler system alarm valve with accelerator, China dry pipe sprinkler system alarm valve with accelerator manufacturers, suppliers, factory







